No Sew Doggy Cape

Average rating of 3.5/5. (3 Ratings)
My rating
  • I love it!
  • I like it a lot!
  • I like it.
  • Just okay.
  • Not for me.
no sew dog cape

Celebrate the DVD release of Super Buddies on August 27th by making this super cute, no sew cape for your best (furry) friend.

Photo and adorable pup courtesy of Candace Rock Photography

What you'll need

  • Vinyl
  • Gold bias tape, wide double fold
  • Hook and loop fastener
  • Glue gun
  • Glue gun glue sticks

How to make it

  1. Before you get started, you'll need to take a few measurements of your pup. You'll need:

    1. The circumference of the neck (or the length of the dog's collar).

    2. The length of the body from the collar to the base of the tail.

    3. The circumference of the largest past of the torso.

  2. cut a rectangle of vinyl

    Cut a rectangle of vinyl. Width should be Measurement 1, the length of the dog's collar. Length should be Measurement 2, the body length from collar to the base of the dog's tail.

  3. use a plate to round corners

    Fold the vinyl in half lengthwise. Use a plate or another round object to trace rounded corners and cut the corners off.

  4. use a bowl to make a neck hole

    Find a bowl or another round object that is approximately the same circumference as Measurement 1: the dog's collar or neck. With the vinyl still folded lengthwise, place the bowl a few inches down from the top of the cape so that half of the bowl is on the vinyl. Trace a half circle.

  5. the cut vinyl dog cape

    Cut out the half circle for the neck hole. Cut along the fold from the top of the cape to the neck hole.

  6. open the dog cape

    Open the cape so it is right side up. It should look similar to the picture to the right.

  7. glue on the bias tape

    Now it's time to glue on the bias tape. Heat up your glue gun and prepare extra glue sticks. Start at the collar opening. Open the wide, double fold bias tape and begin gluing a little bit at a time around the outside of the cape. You are going to sandwich the vinyl inside the folded bias tape. It will be easier if you first glue the bottom of the bias tape to the wrong side of the fabric all the way around. Then, go back and glue the top of the bias tape to the right side of the vinyl. Do just a few inches at a time and lightly press down until the entire outside edge of the vinyl is lined with bias tape.

  8. add a fold at the collar of the dog cape

    Add a fold at the collar, about halfway up. Pinch up an inch or so of vinyl, then lay it down so the fold faces the back of the cape. Glue the fold in place.

  9. hem the front of the cape

    Use hot glue to hem the raw edges at the front of the cape.

  10. add bias tape t the collar

    Add gold bias tape to the collar. Leave several inches of extra bias tape hanging over the edge, and once again sandwich the vinyl between the bias tape.

  11. Glue Velcro to the collar

    Glue strips of hook and loop fastener to the loose ends of the collar bias tape. You may need to trim the fastener so that it fits in the tape. Also, I used black fastener here for visibility, but you may want to use white or another color that blends in better with the bias tape.

  12. Make a bow using bias tape

    If you want to add a little bow to the front, loop a small piece of bias tape and then wrap a second piece around the center of the loop.

  13. add a bias tape bow

    Glue the bow onto the collar fastener.

  14. make a bias tape belt for the dog cape

    To keep the cape from flopping forward in front of the dog, you will also need a second "belt" around the dog's belly. Use Measurement 3: the dog's torso, and cut a piece of bias tape several inches longer than that measurement. Glue the center of the bias tape low on the wrong side of the cape. Add long Velcro strips so that it can be adjusted to comfortable fit around your pup's belly.

  15. no sew vinyl dog cape costume

    The cape is now ready for your dog to wear! Go save the world together!

    Special thanks to my lovely model Bella, and her mama Candace!


    Marigold Haske is everywhere:

    Blog ! Etsy ! Facebook ! Twitter ! Pinterest ! Instagram ! Google + !


Use a Facebook account to add a comment, subject to Facebook's Terms of Service and Privacy Policy. Your Facebook name, profile photo and other personal information you make public on Facebook (e.g., school, work, current city, age) will appear with your comment. Learn More.
Most Popular on Facebook