Back seat passengers will get a lot of mileage out of this cuddly travel pillow. Fashioned from fleece, the pillow is extra soft and requires no sewing. The seams are joined with fabric adhesive, and the facial features and collar are cut from sticky-back felt.Download Pluto Travel Pillow Template
Print the template and cut out the pieces. Tape the top and bottom head pieces together, as shown, overlapping them by 1/2 inch. Now use the template pieces to cut out all the shapes in the specified colors of fleece and felt.
Press the felt face piece firmly onto one of the fleece head pieces.
Then press the eyes and nose in place.
Cut out a sticky-back black felt grin line that is roughly the width of the nose.
Firmly press the grin onto the fleece just above the neck.
Use fabric adhesive to attach the tops of the ears to the sides of the second fleece head, as shown. Set the adhesive as instructed by the manufacturer.
Now apply a line of adhesive 3/8-inch in from the edge of the same head piece you attached the ears to. Go all the way around the head and over the ear tops, leaving only the bottom edge of the neck unglued. This will provide an opening for stuffing the pillow.
Again, set the adhesive as instructed by the manufacturer.
Stuff the pillow with fiberfill, using the handle of the wooden spoon to push the polyester into the curves.
Glue the bottom of the neck closed and set the adhesive.
Peel the backing off the collar piece.
fold the collar piece in half, sandwiching the neck between it.